Whiteside UDFT2100
Up Down Cut (2+2 Compression) Flush Trim Spirals
| Øshank | 6.35 mm (1/4") |
|---|---|
| ØD | 6.35 |
| c/l | 25.4 |
| o/a | 76.2 |
| ball bearing | B3 |
| material | solid carbide |
| flute | 2+2 |
| Item Price Ex. VAT | £ 45.50 £ 40.95 |
|---|---|
| Item Price Inc. VAT | £ 54.60 £ 49.14 |
| Stock Level | 9 |
|---|
Materials: Natural woods, composites, hard plastics, thin aluminum
Recommended RPM: 18,000-20,000 (max 24,000)
Note:
- the installed 1/4" ball bearings are intended for light trimming applications only
- as a guide a section no more than 1.59mm wide × 6.35mm deep should be trimmed
- larger flush trim bits should be used for bigger sections or pre-trim is recommended
Manufacturer:
Whiteside Machine Company; North Carolina, USA
Warning:
- The dust generated from the grinding of tungsten carbide may contain potentially hazardous ingredients. Please ensure you wear the appropriate personal protective equipment. Inhalation, ingestion, eye contact and skin contact should be avoided.