Whiteside RFTD2100
Down Cut Spiral Flush Trim
| Øshank | 6.35 mm (1/4") |
|---|---|
| ØD | 6.35 |
| c/l | 25.4 |
| o/a | 76.2 |
| special use | flush trim |
| features | double ball bearing |
| material | solid carbide |
| flute | 2 |
| Item Price Ex. VAT | £ 37.16 £ 34.56 |
|---|---|
| Item Price Inc. VAT | £ 44.59 £ 41.47 |
| Stock Level | 7 |
|---|
Materials: Natural woods, composites, hard plastics, thin aluminum
Recommended RPM: 18,000-20,000 (max 24,000)
Important Note:
- the installed 1/4" ball bearings are intended for light trimming applications only
- the recommended maximum trim dimensions for RFTD2100 is 1.59mm wide × 6.35mm deep
- heavier trimming applications require the use of the RFTD2100MOD with the 9.53mm (3/8") over-sized ball bearing
- thus pre-trimming the edge to 1.59mm
- else larger flush trim bits should be used for bigger sections
Manufacturer:
Whiteside Machine Company; North Carolina, USA
Warning:
- The dust generated from the grinding of tungsten carbide may contain potentially hazardous ingredients. Please ensure you wear the appropriate personal protective equipment. Inhalation, ingestion, eye contact and skin contact should be avoided.