+44(0)1293 220659 Mon-Fri 08h00-16h00
3 Flute spiral bits for higher feedrate.
Spirals produce a razor sharp vertical shearing action in either up cut or down cut; unlike the standard straight cutting carbide tipped cutters (with brazed tips) which produce a lateral shearing action. When choosing spiral router bits always remember that up cut spirals direct shear towards the router and down cut spirals direct shear away from the router. Up cut therefore favours the face of the work piece facing away from the router and down cut favours the face of the work piece facing the router.
Up cut spirals feed the chips (chip clearance) toward the router and are therefore useful for mortising and cutting dado's; conversely down cut spirals feed chips (chip clearance) away from the router.
Chip clearance is most proficient when extracted (by vacuum) in the same direction as shear.
Available in your choice of up cut, down cut and up/down combination (compression).
Spiral router bits for routing plywood, MDF, particle board, laminates, softwood, hardwood and even insulation sheeting.
Compatible with CNC, hand held and table mounted routers.
SOLID CARBIDE IS NOT GUARANTEED AGAINST BREAKAGE.
|Make #||Shank||D(mm)||c/l(mm)||o/a(mm)||material||flute||Item Price Ex. VAT||Item Price Inc. VAT|
|RUM82270Z3||8 mm||8||22||70||solid carbide||3||£ 27.56||£ 33.07||Buy / Details|
|RUM83280Z3||8.0 mm||8||32||80||solid carbide||3||£ 32.26||£ 38.71||Buy / Details|
|RUM103280Z3||10 mm||10||32||80||solid carbide||3||£ 38.87||£ 46.64||Buy / Details|
|RUM1042100Z3||10 mm||10||42||100||solid carbide||3||£ 40.61||£ 48.73||Buy / Details|